1.The motors and circuit board will heat up with miseuse. Take a 10 minute cool down break between flights to ensure your parts last as long as possible.
2.To avoid being burnt up the USB Charger,it should be used under currents input 0.5A.
3.Don’t push the throttle up hard directly. Adjust the throttle slowly to avoid damage caused by loss of control.
4.The weight of quadcopter is less than 0.5lb and no registration is required for this model on FAA.
I was very surprised with how well this drone hovers. As soon as it takes off you can see how well it handles flight. When it is flown quite a distance away from you, it has the potential to travel upwards a good distance and doesn’t lose signal with the remote. It is fun to turn the drone and fly it in all different directions or to let it hover on it’s own. My favorite part about this drone is it’s ability to flip flawlessly on demand after the press of a button and a flick of the joystick. I can not express exactly how impressed I am with how smoothly this drone glides through the air. I am including a video with this review because I desperately wanted to share this aspect of it with any potential customers.
Assembling this drone was fairly simple. Included is an instruction booklet which tells you step by step how to assemble the drone. All of the required hardware is included, even the screw driver which is needed for screwing in the tiny screws. We also received extra blades and extra landing gear which I am sure will come in handy. Included was an extra battery, a charging cord and a remote control.
When you are ready to use it, the battery slides in on the bottom of the drone and connects to the drone. You simply connect it to the charger when it comes time to charge the battery. Charge time isn’t too super long and with each battery we actually got between 10-12 minutes of use, even though the description states that you should get about 6-8 minutes. When it comes time to use your drone is super handy, charging both batteries and having them both ready and fully charged for. We make sure to give our drone a break in between each battery so that it doesn’t overheat.
The remote control does require batteries which are not included but are super easy to install. The directions gives you a great run down on using the remote control and it is fairly simple learning how to control your drone. The remote actually closely resembles that of a familiar gaming system, so if you have experience with gaming controls then you will have these controls down in no time.
Item Name: T-SMART Waterproof RC Quadcopter
Remote control requency: 2.4GHz
Gyroscope: 6 Axis Gyro
Quadcopter Size: 31.5*31.5*6.3 cm
Charger Time: About 80 mins
Flight Time: About 6-8 mins
Control Distance: About 80m
Quadcopter Battery: 3.7V 600mAh li-po battery
Battery for Controller: 4pcs 1.5V AA battery(not included)
Suitable Age: 14+
1 x Waterproof Quadcopter
1 x Transmitter (Remote Control)
2 x Blades (2 sets)
4 x Landing Skid (2 sets)
4 x Blade Protector (1 set)
2 x 3.7V 600mAh Li-Poly Battery
1 x Screwdriver
1 x USB Charger
1 x User Manual
1 month replacement and 18 months warranty.
Feel Free Contact
If you have any problem please feel free to contact us through the link below: